Slim Leather Edge Pulls for Cabinets and Drawers
KENT leather edge pulls combine genuine leather with a decorative metal rod and are designed for space-saving installation directly on the edge of cabinet doors and drawers. With a slim profile of only 2 mm (0.08"), they sit flat against the furniture edge and are ideal for kitchens, cabinets, drawers and furniture with narrow gaps.
No visible mounting holes on the front of the furniture and no routed recesses are required for installation. A minimum gap of just 2.5 mm (0.1") is sufficient. The slim construction also makes KENT leather edge pulls suitable for retrofitting existing furniture and mirrored doors.
Leather and Metal – Individually Combined
The visible metal rod is a distinctive design feature of KENT. Choose from aluminum, stainless steel, brass, copper or black lacquered aluminum and combine the metal finish with your preferred leather color.
We use carefully selected, firm leather from established European tanneries. Our smooth leathers provide a clean, refined appearance, while selected vintage leathers develop a distinctive patina over time.
Handcrafted Leather Edge Pulls from Our Workshop
Each KENT leather edge pull is handcrafted in our workshop in Bavaria, Germany. The collection is available in ten standard sizes and can also be adapted to individual requirements. This makes KENT an excellent choice for bespoke furniture, custom cabinetry and distinctive interior design projects.
Custom Options and Bespoke Modifications
KENT leather edge pulls can be adapted to individual furniture requirements. In addition to our standard configurations, we offer practical customization options for existing mounting holes, recessed installations and special cabinet constructions.
Standard options and customization at no extra cost:
- Horizontal or vertical mounting: Both orientations are possible. The decorative metal rod is securely retained within the handle and cannot fall out, even when mounted vertically.
- Custom center-to-center spacing: Mounting hole positions can be adapted to existing drill holes at no additional cost.
Bespoke modifications available upon request:
- Custom lengths and intermediate sizes: Individual handle widths up to approximately 500 mm, for example to fit existing recesses in cabinet fronts.
- Custom mounting hole punches: Individually configured mounting holes for special installation requirements.
- Double-layered leather on the mounting side: For example, when the handle is intended to be recessed into the furniture front.
These options allow KENT leather edge pulls to be customized not only in appearance but also in their construction and installation. Please contact us to discuss the possibilities for your individual furniture project.
Variants
- Wide range of leather colors
- 5 decorative rod finishes: aluminum, stainless steel, brass, copper or black lacquered aluminum
Standard Sizes
Size 40: 1.6" × 1.2" (40 × 30 mm), center-to-center 0.6" (16 mm)
Size 64: 2.5" × 1.2" (64 × 30 mm), center-to-center 1.3" (32 mm)
Size 96: 3.8" × 1.2" (96 × 30 mm), center-to-center 2.5" (64 mm)
Size 128: 5" × 1.2" (128 × 30 mm), center-to-center 3.8" (96 mm)
Size 160: 6.3" × 1.2" (160 × 30 mm), center-to-center 5" (128 mm)
Size 192: 7.6" × 1.2" (192 × 30 mm), center-to-center 6.3" (160 mm)
Size 224: 8.8" × 1.2" (224 × 30 mm), center-to-center 7.6" (192 mm)
Size 256: 10.1" × 1.2" (256 × 30 mm), center-to-center 8.8" (224 mm)
Size 288: 11.3" × 1.2" (288 × 30 mm), center-to-center 10.1" (256 mm)
Size 320: 12.6" × 1.2" (320 × 30 mm), center-to-center 11.3" (288 mm)
Additional lengths and intermediate sizes are available upon request.
Mounting Hardware
Smaller sizes are secured with 2 screws, while larger sizes use up to 6 screws. The stated center-to-center spacing refers to the distance between the two outermost mounting holes. Custom center-to-center spacing is available at no additional cost.
The required 3 × 25 mm (approximately 0.12" × 0.98") mounting screws are included.
Material
Premium saddlery leather from certified Italian production.
Decorative Rods
Available in aluminum as standard, or in brass, stainless steel, copper or black lacquered aluminum at an additional cost.
Product Safety Information:
KENT Leather Edge Pulls, Item Number: 502
Manufacturer: minimaro – luxury furniture handles, Thomas Eisenecker, Schulgasse 13, 92637 Weiden, Germany
Email: info@minimaro.com
Leather Colors for KENT Edge Pulls
Choose from a wide range of leather colors for your KENT edge pulls. We recommend ordering LEATHER SAMPLES in advance to find the best color match.STANDARD COLORS
Saddle leather with 0.08"/ 2mm thickness and smooth surface.
LEATHER WITH VINTAGE LOOK - PULL UP LEATHER
Vintage leather acquires a typical patina relatively quickly. This developing "used look" is absolutely desirable and develops more or less depending on the amount of use.
SAMPLE HANDLES without waiting time
So that you can convince yourself of the quality and feel of our handles, we will gladly send you product samples from our stock range. You can return these leather handles after your sampling and we will refund the invoice amount immediately upon receipt of the return.
Choose "SAMPLE" instead of the leather color. Feel free to give us a color preference via the comments field or combine with the corresponding LEATHER SAMPLES for your perfect color match. We will check our stock and send you matching stock items immediately.
Dimensions & Center-to-Center Spacing for KENT
| Größe | BA mm | BA inch | L mm | L inch |
|---|---|---|---|---|
| 40 | 16mm | 0.6" | 40mm | 1.6" |
| 64 | 32mm | 1.3" | 64mm | 2.5" |
| 96 | 64mm | 2.5" | 96mm | 3.8" |
| 128 | 96mm | 3.8" | 128mm | 5.0" |
| 160 | 128mm | 5.0" | 160mm | 6.3" |
| 192 | 160mm | 6.3" | 192mm | 7.6" |
| 224 | 192mm | 7.6" | 224mm | 8.8" |
| 256 | 224mm | 8.8" | 256mm | 10.1" |
| 288 | 256mm | 10.1" | 288mm | 11.3" |
| 320 | 288mm | 11.3" | 320mm | 12.6" |
Metal Rods for KENT Leather Edge Pulls
The visible metal rod is a distinctive design feature of KENT. Choose from aluminum, stainless steel, brass, copper or black lacquered aluminum and combine the finish with your preferred leather color.
- Mounting Instruction (200.71 KB) :
-
Installing KENT Leather Edge Pulls
KENT is mounted directly to the edge of the cabinet or drawer front. A minimum gap of 0.1" / 2.5 mm is required. You can download the detailed installation instructions using the link above.
.jpg "Preview: LEATHER SAMPLE SETS")
